|
This isn't a coach, but just came in from repairing mine.....is a rack and pinion style, and the rear bracket that is bolted to the rack and slide frame had one bolt that connects the bracket to the rail......bolt passed thru vertically, and wasn't tight, but just snug.....so I supported outer edge of the slide with a jack and with the help of a c clamp, tightened the bracket, it had raised the back edge up about 3/8" and that was enough to cause the slide to get pinched at the top.......added a 3/8' bolt horizontal thru both pieces and am back in business......and my hardware store was just 15' away!....I'm in the middle of nowhere....
|
Linear Mode
