iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!
You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!
When the stock stabilizer on my 2010 28 ft Class C E450 was shot, I just ordered a Monroe stabilizer that fit right on. It works beautifully. I can drive with one hand, and barely feel the bumps and seams in the roads. When installing it I found that the passenger side mounting bracket bolts were not tight, and stripped. I was able to rethread the holes to the next larger size and get slightly larger bolts, then torque them to spec. Also ordered a boot for it.
they were monroes. plug and play easy to install. lasted about 7 to 8 years each with 40,000 miles on each. They start leaking.
bought one at rock auto that was supposedly an upgrade not sure what brand and it had the wrong diameter bolt holes at each end. They were Too big.
had to send back and got stock monroe again and lasted 7 years again.
Linear Mode
