Stripped screw hole in slide.

[Chickadee]

OR....tear off a small tuft of a Scotch Brite scouring pad (we used to use steel wool but it'll rust) and pack that tuft into the stripped screwhole, then re-install the screw. It's an old Damage Control measure.

Try it. Ya can always later use some goop brand as mentioned above. Steve

[KC1BUD]

Originally Posted by Doug Sage

Elmers white glue is not waterproof and therefore cannot be used outside.

This is true for outside applications use a waterproof glue, the results would still be the same.

[John-D]

First where is this screw hole? And what does it do, There are many solutions and not all of them involve chemicals as such

[WEJ]

For all wood applications you can stuff toothpicks in the holes so the screw will grab again.