08-16-2020, 09:05 PM
|
#15
|
|
Senior Member
Join Date: Aug 2001
Location: North America somewhere
Posts: 30,951
|
Quote:
Originally Posted by Gary RVRoamer
On your ACE there will be a placard on the inside wall next to the driver seat that shows te original tire size and the inflation psi recommended by Thor. Use that unless you decide to get the coach weighed axle by axle or (better yet) tire corner by tire corner. With axle weights you can reasonably estimate tire loads; with corner weights you have actual tire load. Either way, that will enable you to set the inflation per the tire manufacturers load-inflation table and optimize the tire psi. If that sounds like too much effort, just go with what's on the placard. Do NOT use 110 just because that is stamped on the sidewall.
|
 X2!
__________________
2000 Winnebago Ultimate Freedom USQ40JD , ISC 8.3 Cummins 350, Spartan MM Chassis. USA IN 1SG 11B5MX,Infantry retired;Good Sam Life member,FMCA. " My fellow Americans, ask not what your country can do for you, ask what you can do for your country. John F. Kennedy
|
|
|
Linear Mode
