Uneven wear on slide out track
While replacing the slide wipes on the rear slide of our 2014 34 QFA, I noticed the lower track was showing uneven wear, particularly at the top of the lower track. I did tighten up the screws attaching the track to the slide, as many were loose. I keep the slide lubricated, and lubricated it when I completed installing the wipes. I now know to watch this track closely, from here on. I hope the tightening of the screws will stop this wear.
Is there anything else I can do to help prevent a failure of this slide system?
Thank you for you comments.
__________________
May your smiles be many and the miles be plenty.
Karen & Allen Van Zandt
|