Ok, not sure if you have the same power management system as my Winnebago, (precision circuits) but in my system, if the power demand exceeds the power source a few things can happen.
1. It tries to get the additional amps needed from the inverter and batteries.
2. It begins an orderly shutdown of some circuits.
I have never had my system trip a breaker. It sheds the loads first.
Usually it kills the A/C - Heat pump first. They will come on again when the demand goes below the source again.
If you have this type of management system, it is pretty clear on the displays when it goes into "borrow from the inverter" mode or shuts down a circuit.
__________________
2019 Winnebago Sunstar 35LX (gas class A)
2000 Jeep Wrangler TJ toad
700W solar - 600Ah LifePO4 - Koni EVO shocks
|