Need a little help understanding what wiring I need.
My RV has a 6 pin round connector (see picture) and I am trying to connect to my Jeep Liberty. The wire harness I installed on the Jeep was from Blue Ox and is the basic 4-wire harness. I want to install a connector/mount on the base plate on the Jeep and then plug a harness into the new connector on the Jeep and then to the 6 pin connector on the RV. For those that have done this, how did you do it? I am not having much luck finding the right parts online.
iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!
You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!
If your motorhome is like mine and has separate brake and signal lights, Hopkins also has a converter for that. I just bought one through Amazon and installed it.
__________________
Jerry Potter, Taz
1999 Coachman Catalina Sport
[SIGPIC][/SIGPIC]
If your motorhome is like mine and has separate brake and signal lights, Hopkins also has a converter for that. I just bought one through Amazon and installed it.
When I checked with Blue Ox, they indicated that MH's newer than 2004 would not need the adapter. I certainly need to confirm that... Thanks for the feedback.
Linear Mode
