Quote:
Originally Posted by nopes67
I need to install a brake controller and plug on my 94 Pace Arrow. Its on a Ford chassis. Does anyone know if this has plug and play hook up for my brake controler? I was thinking of going with a prodigy 2. What else would I need to wire this up.
|
the brake wire to the rear is probably blue if the manufacturer installed it. i had a blue wire in the rear but could not find where it terminated under the dash.
you will probably need to run a wire from the front under dash brake light switch to the rear of the moho. i used about 40 feet of 12 awg wire for this purpose on my moho.
__________________
01 WINNEBAGO 35U W20.8.1L 5sp allison SW Wa,. Good Sam, SKP. RVM 198 AMSOIL fluids. BANKS ecm program. SCAN GAUGE II w/ Ally temp. 2 LIFELINE GPL-6CT AGM Batts on their sides. Michelins, TST tptts. K&N panel air filter. AERO mufflers. TAYLOR plug wires. ULTRA POWER track bar. KONI fsd shocks, toad '21MB GLA FWD on dolly
Linear Mode
