|
12-08-2019, 11:15 AM
|
#1
|
Member
Join Date: Jul 2019
Posts: 91
|
Jeep Gladiator toad wiring
Thank you guys for all the help and comments. I decided to go with lod bumper finally after mulling the situation for a while. I have the Air Force one break system already. What do I need as far as wiring for both power and brake lights. I was thinking about the mopar kit for the brake lights but didn’t know if it’ll carry a charge line to the Air Force one unit.
I also don’t know if the power goes direct to the Air Force one unit via the charge line OR does the Air Force one plug wire to my battery and then I set up the charge line to charge the battery. I’ve installed this stuff before but each car is unique and there’s better/worse ways to get it done. Can you guys outline in baby steps what I need concerning electrica/ brake set up for the gladiator
|
|
|
|
Join the #1 RV Forum Today - It's Totally Free!
iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!
You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!
|
12-09-2019, 04:50 AM
|
#2
|
Member
Freightliner Owners Club Retired Fire Service RVer's
Join Date: Sep 2017
Location: Mission TX
Posts: 36
|
https://www.cooltechllc.com/2018-jee...rness-kit.html
This is what I used on my Gladiator for taillights. I don't use the airforce 1 so I can't help on that part.
This wire kit splices inside so it stays dry. Fast easy install with no problems.
__________________
2019 Winnebago ERA 70A
Retired Firefighter
|
|
|
12-09-2019, 06:35 AM
|
#3
|
Member
Join Date: Jul 2019
Posts: 91
|
Yeah. I saw that the deluxe kit has everything. Seems pretty easy. All I need is to make sure one of the cigarette outlets work when the car is off. Or I’ll need to wire an extra one direct to battery.
Thanks guys.
|
|
|
12-09-2019, 09:24 AM
|
#4
|
Senior Member
Newmar Owners Club Freightliner Owners Club
Join Date: Feb 2016
Location: Mississippi
Posts: 607
|
FYI. This doesn't apply to your lights question but, to the LoD bumper. I installed the LoD signature full width bumper on my Gladiator several months ago. One thing I noticed was the width of the attachment points for the Blue Ox hitch. I questioned Blue Ox about the width and it was within the limit. This width reduces your turning radius due to the arms hitting on the hitch. I've had to unhook several times to get into a spot. I actually noticed this because the ears were bent on the Blue Ox attachments. I'm having my bumper attachment points moved closer together. From ~34" to about ~24 - 26" apart. I use the Blue Ox 6500# tow bar.
__________________
2016 Newmar Ventana 4002
2020 Jeep Gladiator
|
|
|
02-02-2020, 07:06 AM
|
#5
|
Junior Member
Winnebago Owners Club
Join Date: Oct 2013
Posts: 15
|
Has anyone wired a towing harness on a Gladiator with the factory LED package?
__________________
Mike & Jeannie
Retired A/C Pasco County Fire Rescue
2004 Itasca Horizon 40KD / 2013 Jeep Sahara / 2020 Jeep Gladiator Overland
|
|
|
02-02-2020, 02:00 PM
|
#6
|
Senior Member
Coastal Campers
Join Date: Oct 2010
Posts: 238
|
Quote:
Originally Posted by pcfr2
Has anyone wired a towing harness on a Gladiator with the factory LED package?
|
I did by copying the cool tech harness. Basically you need a 4 pole double throw switch and some wire. You cut the wires going to the rear and make a circuit with the switch. Hard part is snipping your wires on your new 2020 Gladiator, first one is the hardest...
__________________
2012 King Aire
2020 Jeep Rubicon Gladiator
2004 Wrangler Unlimited w/401 AMC V-8
|
|
|
02-02-2020, 06:14 PM
|
#7
|
Senior Member
Newmar Owners Club Freightliner Owners Club
Join Date: Feb 2016
Location: Mississippi
Posts: 607
|
I used the Blue Ox Tow Bar Wiring Kit - 4 Diodes Item # BX8848. No problems in 4K miles of towing.
__________________
2016 Newmar Ventana 4002
2020 Jeep Gladiator
|
|
|
02-02-2020, 06:34 PM
|
#8
|
Member
Join Date: Mar 2019
Location: Kingwood, TX
Posts: 55
|
Non wiring...
Considering switch from ‘15 Wrangler Unlimited to a Gladiator, how much added weight?
__________________
2019 Fleetwood Southwind 37F
2019 Ford Ranger Lariat
|
|
|
02-03-2020, 07:28 AM
|
#9
|
Junior Member
Winnebago Owners Club
Join Date: Oct 2013
Posts: 15
|
I really don't want to cut into the wiring. Thought about the Mopar harness way expensive. Now thinking about putting a tailgate LED lightbar on the rear of the Gladiator and wiring it to the front baseplate with a plug for the RV. Any thoughts?
__________________
Mike & Jeannie
Retired A/C Pasco County Fire Rescue
2004 Itasca Horizon 40KD / 2013 Jeep Sahara / 2020 Jeep Gladiator Overland
|
|
|
02-04-2020, 04:36 PM
|
#10
|
Senior Member
Ford Super Duty Owner
Join Date: Mar 2016
Posts: 600
|
led lights on a JLU, used the CoolTech harness with no problems.
Steve
__________________
__________________________________________
2017 Newmar CS3710 2019 Jeep Wrangler JLU
|
|
|
02-06-2020, 08:34 AM
|
#11
|
Senior Member
Join Date: Jul 2007
Posts: 157
|
Quote:
Originally Posted by pcfr2
I really don't want to cut into the wiring. Thought about the Mopar harness way expensive. Now thinking about putting a tailgate LED lightbar on the rear of the Gladiator and wiring it to the front baseplate with a plug for the RV. Any thoughts?
|
Hopkins now makes a no cut plug and play kit.
__________________
2007 Georgetown 373 f53
2007 Colorado
2019 JL Wrangler
|
|
|
02-07-2020, 07:58 AM
|
#12
|
Junior Member
Winnebago Owners Club
Join Date: Oct 2013
Posts: 15
|
Thanks, Hopkins 56210 harness is ordered. They say it is plug and go ready for the LED package.
__________________
Mike & Jeannie
Retired A/C Pasco County Fire Rescue
2004 Itasca Horizon 40KD / 2013 Jeep Sahara / 2020 Jeep Gladiator Overland
|
|
|
03-16-2020, 05:33 AM
|
#13
|
Senior Member
Join Date: Feb 2016
Posts: 665
|
Quote:
Originally Posted by pcfr2
Thanks, Hopkins 56210 harness is ordered. They say it is plug and go ready for the LED package.
|
Did you install the wiring on your Gladiator and did it work.
__________________
Larry and Sheila 2008 Fleetwood Discovery 39R
Retired U.S. Air Force (SAC) Vietnam Veteran
2022 RAM 1500 5.7 HEMI
|
|
|
03-17-2020, 10:55 AM
|
#14
|
Junior Member
Winnebago Owners Club
Join Date: Oct 2013
Posts: 15
|
Did have a little hiccup, Hopkins had a batch of harnesses that were wired bad but have gotten past that and replaced the bad one. It has installed and working Great! Easy Install.
__________________
Mike & Jeannie
Retired A/C Pasco County Fire Rescue
2004 Itasca Horizon 40KD / 2013 Jeep Sahara / 2020 Jeep Gladiator Overland
|
|
|
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Discussions |
|
|
|
|
|
|
|
|
|
|
|
|
|
All times are GMT -6. The time now is 06:54 PM.