Quote:
Originally Posted by HR2004
Has anyone experienced rack and pinion seal failure towing on a stehl dolly?
We have towed our 09 Hyundai Sonata thousands of miles. Yesterday while unloading from dolly a stream of oil appeared. Going to our local Hyundai dealer tomorrow.
|
We have a Stehl as well, and it is a pivot pan dolly. Is the pan pivoting on the big bolt that is in the center of the pan, as you turn a bend? The front tires are strapped to the pan, so as you turn a bend the car will force the pan to pivot on the bolt.
Only two ways I could think of dolly putting pressure on the steering:
1.) The pivot pan isn't pivoting, forcing the car steering to try and turn as you go around a bend.
2.) You are making really tight turns, and the pivot pan is pivoting but hitting the turn stops....and then putting pressure on the car steering.
Do you straighten out your pan, before reloading the car, if the pan is not in the straight forward position?