Photo of Ready Brake install on CR-V Firewall

[Tim&Paula]

Does anyone have a photo of where you drilled the hole in the firewall for a 2012 or later model Honda CR-V for the ready Brake cable and ready stop break away mounting location and where that cable penetrated the firewall also?

[doorguy]

I installed one on my 06 crv, but probably won't help you any. I found I had to pull the left front tire(better access) and I measured many times. I had to drill from behind the brake pedal and just above where the steering horizontal shaft is(Don't want to hit that). I could then find a route for some gentle bends to get it to the front. It wasn't a hard job.