Readybrake install on 2010 Jeep Wrangler

[bruc]

Does anyone out there own a 2010 jeep wrangler set up for a readybrake system and cooltech wiring harness? I am going to install both on my 2010 jeep wrangler limited , and was wondering if anyone had any tips or better yet photos on where to place the brake cable coming thru the front bumper and where to mount the 4-pin socket for umbilical cord for lights. Thanks for any help , Bruc.

[britcon]

I did this exact install about 1.5 yrs.ago. The Blue Ox baseplate has a bracket at the center for mounting the 4 pin connector. I brought the brake cable loop ( black one ) out just to the right of the electrical connector. They recommend keeping the brake cable as straight as possible from baseplate to connection on Readybrake arm. I brought the break away ( red ) cable out just inside the drivers side socket for tow pin.
I routed the cable sleeves and wiring harness along the drivers side frame rails. PM me your email I'll send you a pic.

[bruc]

Thanks for getting back to me . Sorry I'm so late getting back to you. I would appreciate any photos you have showing the Readybrake cable out the front of your Jeep. My e-mail is dudleybru@Hotmail.com. Thanks for your help.