|
02-07-2022, 10:05 PM
|
#1
|
Senior Member
Join Date: Sep 2021
Posts: 178
|
Towing a 3 wheeled bike such as a Ryker or Spyder?
We were RVing up at 3 Rivers a few months ago and I spotted a rig about my size (25' Minnie Winnie) that had a clean looking tow dolly for his 3 wheeled motorcycle along the lines of a Spyder or Ryker.
Anybody else out there tow their Spyder, Ryker or like type 3 wheeled motorcycle behind their rig?
Photos?
Where did you get your tow dolly? Make?
How does it tow?
|
|
|
|
Join the #1 RV Forum Today - It's Totally Free!
iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!
You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!
|
02-08-2022, 10:58 AM
|
#2
|
Senior Member
Fleetwood Owners Club Workhorse Chassis Owner
Join Date: Feb 2000
Location: San Jose, Ca, USA
Posts: 2,698
|
If the drive wheel/s are on the ground then the transmission output shaft will be spinning - unless the machine is designed so that the transmission gets lubricated in such a configuration then you're apt to do damage. That's why most rear wheel drive cars cannot be towed on a dolly - they need to be towed with the drive wheels off the ground.
__________________
Alan Hepburn - San Jose, Ca
2007 Bounder 35E being pushed by a 2020 Jeep Gladiator Sport S or a 2022 Jeep Wrangler Unlimited (JLU) Sport S
|
|
|
02-08-2022, 02:28 PM
|
#3
|
Senior Member
Join Date: Dec 2009
Location: Out there, somewhere
Posts: 9,941
|
Quote:
Originally Posted by SantinoDad
We were RVing up at 3 Rivers a few months ago and I spotted a rig about my size (25' Minnie Winnie) that had a clean looking tow dolly for his 3 wheeled motorcycle along the lines of a Spyder or Ryker.
Anybody else out there tow their Spyder, Ryker or like type 3 wheeled motorcycle behind their rig?
Photos?
Where did you get your tow dolly? Make?
How does it tow?
|
The first question would be, why dolly such a small vehicle? And three wheels at that? Why not simply get a small low boy flat bed trailer and run your Ryker or Spyder onto that? That way you could back it up if necessary and, you'd have ZERO wear and tear on the Ryker's or Spyders drive train. As has been stated, unless the drive system is designed to be protected IF AND WHEN TOWED, then you'd have some potential for serious damage. If you backed the Ryker or Spyder onto the dolly, then you'd have the single front wheel taking all that stress and you'd have to lock it down so it couldn't steer.
To me, waaaaaaaaaaay too much trouble and the potential for damage. A small trailer would be the answer but, that's just me.
Scott
__________________
2004 ITASCA HORIZON 36GD, 2011 GMC Sierra 1500 4x4 Toad '20 Honda NC750X DCT
2018 Goldwing Tour DCT Airbag
Retired-29.5 yrs, SDFD, Ham - KI6OND
Me, Karla and the Heidi character, (mini Schnauzer)!
|
|
|
02-14-2022, 06:49 AM
|
#4
|
Senior Member
Join Date: Nov 2018
Location: Fulda, MN
Posts: 1,254
|
Aren't those type of rides double front steering and single rear drive? Putting it on with the rear on the dolly would keep the drive train from rotating. Of course it would be like putting a rear wheel drive on backwards which is not recommended.
__________________
2000 Winnebago Adventurer 32v, P32 Workhorse
2005 Winnebago Adventurer 38J W24 Workhorse 8.1l, 5 Speed Allison MH2000
|
|
|
02-14-2022, 06:50 AM
|
#5
|
Member
Monaco Owners Club
Join Date: Dec 2012
Location: Lafayette, IN
Posts: 58
|
I have had a Spyder's for several years and have towed many ways, but NEVER would I consider a dolly. The front would hit if towed rear wheel was in a dolly and the rear drive would be spinning if front wheels could be somehow set into a dolly without destroying the front. The drive line wear I am sure would not be a good thing and certainly not endorsed by Can Am.
Get a trailer if some form, as this will safely allow you to have an easy time taking your fun with you and not take the chance of substantial damage and premature wear of everything including the soft compound tires.
|
|
|
02-14-2022, 07:06 AM
|
#6
|
Member
Newmar Owners Club
Join Date: Dec 2014
Location: Phoenix
Posts: 38
|
|
|
|
02-14-2022, 10:23 AM
|
#7
|
Senior Member
Join Date: Dec 2009
Location: Out there, somewhere
Posts: 9,941
|
Quote:
Originally Posted by Aweese
|
The T-40 101 Cycle version is the only one that could possibly work for the OP. And even then, he'd have to make sure his hitch mechanism could handle that kind of tongue weight as the Ryker/Spyder's total weight PLUS the majority of that dollies weight is on the tongue. AGAIN, the logical answer for the OP is a trailer.
Scott
__________________
2004 ITASCA HORIZON 36GD, 2011 GMC Sierra 1500 4x4 Toad '20 Honda NC750X DCT
2018 Goldwing Tour DCT Airbag
Retired-29.5 yrs, SDFD, Ham - KI6OND
Me, Karla and the Heidi character, (mini Schnauzer)!
|
|
|
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Discussions |
|
|
|
|
|
|
|
|
|
|
|
|
|