Verifying Toad Light Wiring
I have purchased a 2002 CRV which has a Roadmaster wiring system installed. I will be towing it with a 2004 Journey which had a Demco Senturian system [which I have removed]. [It also has the factory installed 7 pin trailer socket.]
Before I start blowing fuses left and right, I thot' I'd check out the CRV wiring sytem to verify which wires controlled what and not take it for granted the green was right, yellow, left, etc.
I brought out a 12 volt battery, connected the negative to ground on the CRV, and a meter to the positive terminal. I expected that when I touched the meter probe to the various wiring terminals on the CRV's lighting plug, the corresponding light would be illuminated. When I did this, the meter read 12+ volts across the terminals but no lights came on, so I still don't know which wire does what.
Where am I going wrong?
Thanks,
Ron
|