Journey with Confidence RV GPS App RV Trip Planner RV LIFE Campground Reviews RV Maintenance Take a Speed Test Free 7 Day Trial ×
RV Trip Planning Discussions

Go Back   iRV2 Forums > MOTORHOME FORUMS > Class C Motorhome Discussions
Click Here to Login
Join iRV2 Today

Mission Statement: Supporting thoughtful exchange of knowledge, values and experience among RV enthusiasts.
Reply
  This discussion is proudly sponsored by:
Please support our sponsors and let them know you heard about their products on iRV2
 
Thread Tools Search this Thread Display Modes
 
Old 06-15-2022, 06:15 AM   #1
Junior Member
 
Join Date: Oct 2020
Posts: 23
Cracks in oven frame

Hello all,

The metal frame of my oven is developing a few cracks in my 2008 Winnebago Access. Upon examination, I found some loose screws around the frame that had caused the oven to slightly sag and the weight was cracking the frame.

My attempt to rectify the problem was to move the oven back into place, tighten the screws and put some black electrical tape over the cracks so my kids donít cut themselves on the sharp edges.

Anyone else ever have this problem? Should I be using lock washers or loc-tite on the screws? Or is it simply time to replace the oven?
Attached Thumbnails
Click image for larger version

Name:	62A25EC2-5364-42FC-BECE-F2BD29DD4D32.jpg
Views:	10
Size:	275.2 KB
ID:	368321   Click image for larger version

Name:	9E7CA843-C2C5-4C6C-B118-0A1A841B2CA1.jpg
Views:	11
Size:	290.0 KB
ID:	368322  

MrMax is offline   Reply With Quote
Join the #1 RV Forum Today - It's Totally Free!

iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!

You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!

Old 06-15-2022, 06:30 AM   #2
Senior Member
 
Ron Dittmer's Avatar
 
Join Date: Jul 2018
Location: Elkhart, IN
Posts: 1,448
That is odd. I never seen such a failure before.

It is a reflection of how badly the house is punished when being driven.

It is critical that everyone should weigh their rig during their trips and adjust the tire pressure accordingly. Too little air is bad for obvious reasons, but too much air makes for an exceptionally rough ride which wreaks havoc on the house and everything attached to it. Too little or too much air in the tires also makes "handling/driving" the rig worse.

People with short motorhomes often have the opportunity to soften the ride up front as I learned with our rig. CLICK HERE to learn more.
__________________
Special Ordered Our 2007 Phoenix Cruiser 2350 Without A Slide-Out, Built On A 2007 Super-Duty E350 Chassis With 6.8L-V10 Engine. CLICK HERE FOR MANY PICTURES
Ron Dittmer is offline   Reply With Quote
Old 06-15-2022, 06:40 AM   #3
Senior Member
 
Hpozzuoli's Avatar
 
Join Date: Jul 2021
Posts: 492
Not sure if I buy the vehicle did that. I would bet the crack was there to some degree and made worse by the movement. You would have to twist the heck out of that to crack it. More than your house frame can possibly muster.
__________________
2012 32í Tiffin Breeze
2007 29í Winnebago Aspect (Sold)
1983 35í Bluebird Wanderlodge (Sold)
Hpozzuoli is offline   Reply With Quote
Reply

Tags
crack, frame, oven



Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Bounder: Foam Filling frame box frame. good or bad idea? PeterCarole Fleetwood Owner's Forum 4 11-13-2017 08:50 PM
Wood frame vs Aluminum frame Jayco23FB Jayco Owner's Forum 1 03-10-2014 08:09 PM
Wood Frame vs. Aluminum Frame looking for your input! Tumble Weed 5th Wheel Discussion 3 02-11-2013 07:31 PM
Found three cracks on welds on front frame woodyk Workhorse and Chevrolet Chassis Motorhome Forum 1 11-23-2009 08:04 AM
All Steel frame vs Aluminum frame Always-RVing MH-General Discussions & Problems 15 10-12-2009 11:48 AM

» Featured Campgrounds

Reviews provided by


All times are GMT -6. The time now is 08:13 AM.


Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2022, vBulletin Solutions, Inc.