ERROR Messages on LCI Auto Leveler--Tech issue

[Qunatumws]

Have LCI auto leveler system.

.---------****ERROR**** Retraction timeout"

======ALSO in read out "Return Leveler for service"

Was fine till one jack scrapped the ground after leaving the gas station. They do retract and auto level. BUT I have a service error I can not turn off. Also the level control beeps to signal the error code...---------****ERROR**** Retraction timeout"

======ALSO in read out "Return Leveler for service"
Anyone had a reset issue that can help. In the past I could press the retract and enter together to reset. No such luck. Also the on/off will not shut off the display

[HarryStone]

As long as you have a retract error, it won't shut off. Does it retract all the way? have you looked underneath?
From the manual

Parking Brake not engaged. Press Enter and Retract. Engage parking brake.
Engine is not running prior to starting auto retract sequence. Press Enter and Retract at the same time to clear error. Turn engine on and restart auto retract sequence.
Leaking hose or fitting.Check for leaks, repair if necessary. Press enter and retract to clear error.

[Qunatumws]

Thanks and will do all the clear sequences again.

The only thig I have not tried is to trying to rest with the parking brake Not Engaged. The code to clear I have. And you are correct if the error remains it does not power off

Thanks Ed

[gljurczyk]

Unplug the modular plug in back of the screen wait a minute and plug it back in again and see what it reads. If that doesn’t clear it call LCI they can help you with it, I found them to very good in helping you diagnose the problem.

[Qunatumws]

Originally Posted by HarryStone

As long as you have a retract error, it won't shut off. Does it retract all the way? have you looked underneath?
From the manual

Parking Brake not engaged. Press Enter and Retract. Engage parking brake.
Engine is not running prior to starting auto retract sequence. Press Enter and Retract at the same time to clear error. Turn engine on and restart auto retract sequence.
Leaking hose or fitting.Check for leaks, repair if necessary. Press enter and retract to clear error.

Thanks and all the errors are now gone. I am not sure how or why but after a few auto level and retracts on level surface they reset. I can clear any other occasional error that comes up pressing the retract and enter buttons.

One issue I still have is eeven though they level correctly and displays indicates complet-success, It may have one orr two of the level red lights flashing? I can turn off and shut off the display and all is fine....Just wondering why the blinking light or lights on different jacks. Mosstly the flashing ones are ---Front and Right ones.

I also have a concern when the front wheels lift off the ground to get to a level. I have the shims blocks but am guessing the streangth of them actually holding up the front tires???

Thanks for the help as last time.

Ed