Im trying to hook up a pathway x1 to standard def tv in living room.On the winegard box were all the cables plug in there is no y-w-r cable inputs so i have to get to the TV back but it doesnt move! The dealer says there is a spring loaded latch underneath but there is a slide out bed there and i dont feel no latch under the TV! HELP!
iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!
You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!
It would help to list the year, make and model of your motor home so those who own similar rigs can chime in.
Rick
According to the OP's profile they have a 34' Forest River Forestor.
__________________
Ted 'n' Laurie, plus Jackson (aka Deputy Dog, the Parson Russell Terrier 'fur kid') and, Rylie (who crossed the Rainbow Bridge June 14, 2012).
We have a Forester with a flush mount TV in the main living area. It doesn't move either. The Forest River forum was helpful in stating ours had to be lifted straight up against the wall (then pull towards you) and it will come out of the wall bracket that holds it. It can take two to hold it as the cables remain attached. It's difficult to lift up, pull forward and hold it all at once but ours did come loose so we could reattach a cord that was loose.
You might try this and see if yours works like ours.
Linear Mode
