I am a newbie here, so bear with me. I've done several searches, but can't seem to find what I need.
I bought a set of 2-step scissor stairs from ebay, which came new, but with no instructions or bolts.
I have a Class C 1991 Travelmaster Signature 26.5' and need some help getting in! I am short and my dogs have a hard time jumping in, too. The scissor steps look like they will be fine if I can figure out how to install them.
If you have any close up photos on how yours are installed, that would help immensely. I found a website with limited instructions that said to use 1/4" carriage bolts, but will hold off buying them until I (hopefully) hear back from the forum.
I hope you can help!!! I don't want to drill holes into my little rig unless I am positive it is right.
iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!
You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!
First.Welcome to the forum . Are there not any steps on your Class C.
Can't you see how those are installed and kinda retro fit the new step. Sorry I am probably not much help..Again Welcome and Good Luck...D
There are steps under the RV door that are rusted and won't pull out (heard that is quite common). The scissor steps are attached (somehow) to the outside and fold up when not in use. Thanks for the reply and welcome!
Need help with installing scissor steps
. Are there not any steps on your Class C.
Linear Mode
