Journey with Confidence RV GPS App RV Trip Planner RV LIFE Campground Reviews RV Maintenance Take a Speed Test Free 7 Day Trial ×
RV Trip Planning Discussions

Go Back   iRV2 Forums > Jim_ Bob
Click Here to Login
Join iRV2 Today

Mission Statement: Supporting thoughtful exchange of knowledge, values and experience among RV enthusiasts.
Conversation Between Jim_ Bob and RROLDSX
Showing Profile Comments 1 to 3 of 3
  1. RROLDSX
    07-10-2018 03:25 PM
    RROLDSX
    Jim-Bob:

    Do you have an a Onan Marquis 7000 generator? Iím trying to figure out two things:

    1. Do I use them 3 wire momentary control installation?
    2. Did you tie into your dash switch remote wires for some of your connections?

    Thanks,
    Randy
  2. Jim_ Bob
    07-05-2018 06:34 AM
    Jim_ Bob
    I still canít get it to attach the pictures But now it wonít let me send text because it says the text is too big. Over 4000 characters

    Can I just send everything to your email address
  3. Jim_ Bob
    07-04-2018 08:12 PM
    Jim_ Bob
    This is the connector that plugs into the control box.
    My wire colors matches the colors of the wires coming out of the generator. I used #14 wire except for the power those wires are straight from the battery. They donít go in my junction box. For that I used a 2 conductor #12 wire rubber good for wet locations. Black to number 3 White to #4 (would rather had green for ground) my white and that orange are both grounds. I put them together. There are a couple ways to do it but this was easy but you have to use a crimp on connector. I did make this a little neater. There was too much insulation taken off a couple wires fixed now.

    IT WONT LET ME attach the picture ??? I tried everything

All times are GMT -6. The time now is 05:47 AM.


Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2022, vBulletin Solutions, Inc.