Needing some advice regarding RH turn signal assembly. My current assembly is held in place by self tapping sheet metal screws (with a stripped out hole).The new replacement from Newmar has tapered pins that look like they push into grommets. My driver side lens uses screws as well. Newmar has no exploded view of the assembly. Can you tell me how your lens assembly is held in place?
I have a post with pics in the Newmar owners section. Donít know how to attach them to a PM.
Hello FC, I could use some advice regarding fuel filters, I think our coachs are both ISL 400 Cummins and hoping you could offer some input.
I have bacteria in my fuel which I can see in the fuel/ water separator bowl (Fleet Guard FS1242B) I have shocked the tank with PS Biocide, added PS tank cleaner and changed the fuel filter. I read conflicting reports on whether there are 2 FF's (primary and secondary) on this engine. There is a small filter behind the oil filter on the exhaust side of the engine. Do you happen to know what this filter is? I can't see a part # on it, it could be a coolant filter(?).
Last service (and first one under my ownership) the shop doing the work charged me for 2 FF's (both fuel/ water separator types based on the part #s listed on the invoice.)
Not sure if they screwed me or I just haven't located it yet.
Appreciate any comments you might have.