Conversation Between VoiceNinja and jpeto
Showing Profile Comments 1 to 1 of 1
-
I have a 2008 Fleetwood Bounder and have penned the following to present to service manager at RV repair facility but if you have access to a different manual then I have perhaps you could share that with me. The link you posted no longer works. If I could at least get the manual instructions and know that they will work then perhaps I could just order the encoder from Lippert and get it done. Thanks for any help!
"Slideout would not retract correctly with only motors 2 & 3 seeming to operate when attempting to retract. After running through the tests provided by Power Gear in Manual 82-S0379 Rev 2 and in 82-S0525 and 82-S0514 it seems that the external encoder on Motor #1 located on slide at front of coach does not work. If you depress the in or out field reset buttons on the control box while operating the wall extend or retract switch the room will move which seems to indicate that all motors are operating and that the problem is with the encoder on motor 1."