I found a wiring diagram online for a three wire start cap w relay. The black wire has to go to power. You should see black wires coming off the contractor. This is where you can get power. The white wire goes to the run capacitor terminal where the yellow wire is connected from the compressor. The red wire goes to the other terminal on the run capacitor.
Hope this helps.
Hi, saw that you have private sites near Asheville. We are looking for something in early Sept for at least a week. We have a 40 Dynasty. We are scoping out the area as a possible place to live soon.
434-294-3661 please leave a msg if I don't answer