Journey with Confidence RV GPS App RV Trip Planner RV LIFE Campground Reviews RV Maintenance Take a Speed Test Free 7 Day Trial ×
RV Trip Planning Discussions

Go Back   iRV2 Forums > Members List
Click Here to Login
Join iRV2 Today

Mission Statement: Supporting thoughtful exchange of knowledge, values and experience among RV enthusiasts.
bruceisla has a spectacular aura aboutbruceisla has a spectacular aura about

bruceisla bruceisla is offline

Senior Member

Profile Comments

Showing Profile Comments 1 to 8 of 8
  1. Gurleymon
    Hi Bruce, Would you mind emailing your documentation on the intellitec? I am having an issue with my slide lock arm 1 not lighting the LED. Was able to jump 1-4 to get slide in. Now I need to figure out what could be wrong with LA1 proximity switch. Also was wondering if there will be any problem on deployment since LA2 paddle is locked in place and LA1 is not deployed due to jumper? I removed the jumper once slide was in. My email is Thanks
  2. BPoland
    07-17-2019 12:20 PM
    The Good, The Bad and the Ugly. The good - I completed the task without falling off the roof. When I got the cover off, and the styrofoam, I then had a plastic cover held on by 5 3/16 hex head screws and as many plastic clips. Once I got that done, it looked a little like you mentioned. I was able to get my hand in that front opening. The Bad - there was a gasket running at an angle to the opening. I was not able to get my fingers into the other opening. Lastly, the Ugly - looks like I will be buying another heat pump in August. I can’t seem to catch a break these days.

    Thanks for all the help Bruce!
  3. Jeffreys
    10-25-2018 03:25 PM
    Hi. My email is: Thank you Bruceisla
  4. VP Chianese
    Looked at your About Me. Are you in Motor Coach Resort in PSL? Or what ever we call it now.
  5. haynurse
    01-30-2016 01:34 PM
    Good day Bruceisla I saw your post on how to do a bug screen. You had some great ideas. I am in the process of making one for our 1999 Holiday Rambler. It is going great so far. I also made a shade screen for the front windshield. This will help when the sun is out of the west. Thank you for the great ideas.
  6. wallypeach
    Hola Bruceisla

    I have a Holiday Rambler (98) quick-fill valve leaking and overfilling the water tank. What valve did you select to replace the swan quick-fill with? I have seen the posts regarding a faulty check valve but Im not sure how that would over fill the water tank.

    Thanks, Steve
  7. buck454
    10-12-2013 06:59 PM
    I installed new ES Relay/Solenoid a couple of weeks ago and this afternoon installed Amp-L-Start. It has been about three hours and unit still shows to be charging Chassis Batteries. I am a little concerned that it has not switched over to Maintaining Mode but perhaps it just takes a while to get proper charge to CBs.

    Thanks for asking. Hope ALS is all I expect.

  8. mrock
    04-21-2013 05:52 AM
    Thanks for your input. On my unit you can scroll through all settings. Auto, high and low with no appreciable change. You can tell when the compressor kicks in there is a very slight change in speed. Can you determine a difference between your high and low speed fan? On mine there is no difference. That is why I think I have my low speed fan out. There is two fans in my two A/C units low and high. I have found some documentation from Coleman Mack that trouble shoots low and high fan problems. I would not have a problem with this except for the noise associated with running the A/C on high all the time. Appreciate any input you may have. Thx Marty

About Me

  • About bruceisla
    State or Province
    RV Manufacturer
    RV Model
    RV Year
    RV Length
    Location (City, State):
    Foley AL
  • Signature
    2005 Newmar Essex 4502, 2013 Caddy SRX
    1997 HR Endeavor 37, CAT, 1996 Geo Tracker


Total Posts
Profile Comments
General Information
  • Last Activity: 04-26-2022 01:06 PM
  • Join Date: 10-21-2012
  • Referrals: 0


Showing Friends 1 to 2 of 2

All times are GMT -6. The time now is 12:24 PM.

Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2023, vBulletin Solutions, Inc.