glennwest

Hi its a 1994 Teton Memphis 37' the floor has 1/6 bottom plate with 3/8 cdx chip board for a bottom floor . I want to change it to 3/4 marine ply with 1/16 sheet poly bottom so it slides and not so soft . Im going to rebuild the walls where needed and swoop bottom plate out with the ply just going to do a little over kill . I'm just going all the way through it I have the time and a building I put it in for know . hate to let the tractors set out . Sorry haven't been online . Going to fix slide while its still in with 2/6 screwed in each side to hold up . Its not as bad as I thought just time consuming . So I'll poly 20x50 of the shop to heat it this winter and do little at a time .
Thanks Brad