Hopefully you are still active. I have a 2005 AE40 and the slide motor comes on when I press the button and works as normal except the piston will not move. So to bleed the piston do you just open the connection at the front of the piston and then crawl out and activate the in/out button for a few seconds and then tighten the connection at the piston. Thanks Gary gdb3194@gmail.com
Hi Jake21 , u were right about the a/c, I brought the temp down to 72 and turned the unit off. I turn it back on and set it to 70 and the auto worked great..thx