MrMark52

Mark and Sharon,
Howdy from Colorado, where it was only 78 F today and a light breeze.
Took the dirt bike out today and rode about 40 miles of mountain trails.
LOTS of Texas plates in the parking lot
Haven't heard about how the "pile driving" is going.
Looking for an update........
Mike

CCM Chassis Control Module, R26 workhorse has two, front and rear.
I hope you enjoyed your cruise!!

MrMark While exercising the MH and Generator this morning the message in dash read "No CUMM between ABS and CCM kept blinking between it and low fuel.
The only thing I find in the front CCM related to ABS are the 3 30amp fuses, which are good. There are four relay like on top of the front CCM that are not marked and not covered in the book.

MrMark, Sarge here. When I first posted this ABS light on in workhorse chassis UFO Pilot posted I should have the post moved to workhorse Chevrolet chassis as I was in a club.
Lt. Dan said the post was moved; I can't seem to find it. I am not very computer savvy and have trouble navigating the forum.
Please feel free to text me at 337 368 1473.

Sorry, forgot to tell you it is a Workhorse UFO R26 under a 2008 Winnebago Destination 37G. The park brake switch (yellow Knob on Dash) is in middle position, spring loaded in or out. Not being able to set the brake will not allow it to go in any gear or operate slide outs.

Hi MrMark, is the workhorse parking brake file for Chevy Chassis? Ive got a 1989 Chevy chas thanks

Hi guys.
The solar eclipse is April 8th.
I 'm planning to be in Dallas on the 1st or 2nd of April. Need to make an early AM sales call in Crowley and they said I could come in either day.
Mike

Hello Mr Mark, I am Brett Lipeles, owner of Durango RV Repair LLC

I have a customer who had their 2008 monaco monarch board damaged in an rv fire. It needs some repair as I am unable to locate a replacement board. I can send pictures if you are interested in the work and then ship the board to you for repair.

Please let me know -970-844-4080