Like more info on the refrigerator door seal you fixed with Home Depot foam tape. I have a four door norcold with bad seals on the lower doors. Did you remove all of the door seal, the damaged part, or did you tape over all of it. no parts from Norcold on my model. Thx
There is a Norgren Ride height valve as They call it that dumps the air prior to the Jacks going down- It's located behind your Genny on the upper frame where several air lines run to and 2 solenoids for air up and air dump - take a look at that. - I can send you a picture if you need.
What year is your Eagle ?
Have you checked the fluid level on the Tank ? If it's too low the red light will stay on and it won't function.
My Coach has to be running to Dump and Operate the Power Gear Jacks.
Let me know what you find.
450 HP + I installed a 150 hp Fuel plate kit from TST Performance as I needed more power pulling my Race Trailer, Prior to that I called Allison Tech line and spoke to one of their Engineers and He confirmed that unless I was Tractor pulling with my Eagle that My MD 3060 would handle the extra power just fine.
Yes ! I painted my coach and had the decals made by a local Graphics shop.
If you ever need or have any questions , don't hesitate !!
I've been there and done that on my Eagle.