This is the connector that plugs into the control box.
My wire colors matches the colors of the wires coming out of the generator. I used #14 wire except for the power those wires are straight from the battery. They don’t go in my junction box. For that I used a 2 conductor #12 wire rubber good for wet locations. Black to number 3 White to #4 (would rather had green for ground) my white and that orange are both grounds. I put them together. There are a couple ways to do it but this was easy but you have to use a crimp on connector. I did make this a little neater. There was too much insulation taken off a couple wires fixed now.
IT WONT LET ME attach the picture ??? I tried everything