Jon,
Hey, as I saw your post and wanted to say thanks for the HEADS UP on the "NPRC" for some folks who may be in search of Military Records. Here is a FREE GIFT link of you like traveling to Florida as it has a good number of CAMPGROUNDS all over the state called https://www.CampFlorida.com Thanks again for keeping me on my toes...lol
Hey Jon,
My Norcold 1200 rlim refrigerator started using for gas than usual and making an occassional "spft" sound The was still nice and blue. I had cleaned the orifice/burner with a small wire brush and compressed air. It didnt seem to help. I removed the orifice/burner and just tapped it on the concrete. A whole load of soot came out of it. What a difference.
I know you had a concern in drycamp last year about yours.
The orifice/burner looks like stainless steel but it is not. It is only plated. I have opted to replace the orifice only because it is such a pain to get to. You have to remove the other end of burner tube then screw on orifice. Then pull it out toward rear.
Hope this helps with your refrigerator.
I am prepping my RV for winter down south and am listening to live radio traffic of folks in keys with updates on damage from Irma. Marathon, CudJoe and Summerland took a hard hit.
Hope to see you all down there this year.
Louie
Hello Skypilot We will be in Key West on Monday (Feb 6th) for a week. We are with a USNA Alumni Group and will be boondocking on a field in Truman Annex down by the beach.. If you happen to get a free moment (i know that is tough in Key West where almost all moments are free moments) come over and see me(us) I am in a white 2000 American Eagle. talk soon === Dale
John,
Brian told me you needed a battery cable crimped. I thought I told you but as if I did not. Save your money, I have a 16 ton hydrolic cable crimper with me. I also have solid copper ends that are 2awg, 4 awg and 00/2 awg in both 5/16 and 3/8.
Have a good one.
Lou
We are on site 61 but expect to get moving notice this Friday. I was just over near you this morning helping Dan move in a few sites down from you. I was told that the list would resume when more arrive. See you soon.
Lou
Ben, I have been working on Splendide washer/dryer combo. The mother board gave up the ghost. I am now disassembly to provide parts to someone else. If you are not here yet, we hit 30 in dry camp today. looks like 2 maybe 3 days before fhu when you arrive. It started filling up this week. Good luck and have safe travel. Lou
Ok, just to give you a heads up, we started rotation yesterday. There are now 12 rigs in dry camp and wait is 1 to 2 days.
There has been an influx for the Thanksgiving Holiday. Two of our neighbors who have arrived this week will be leaving at the end of the weekend (active duty on vacation). I suspect that dry camp will dwindle after Monday just in time for you all to arrive.
Be safe on the road.
