A while back you posted about an inverter/charter issue you were having. You wrote "I had a inverter/charger that was passing thru a/c but not charging. I done a factory reset and then reset the battery settings and it then worked. The battery settings were correct before the factory reset but something wasn’t right with the computer of the unit. The factory reset was a hard boot and it then worked."
I am having the same issues as described in this thread. When you say you did a factory reset, do you mean on the ME-RC Control or the inverter itself? If it is on the control, how did you do that? I did the reset on the inverter itself. When plugged into shore power the controller reads "Absorb Charging DC 14.3v" but 0 amps.
