iRV2 Forums

iRV2 Forums (https://www.irv2.com/forums/)
-   Vintage RV's (https://www.irv2.com/forums/f65/)
-   -   NEED 1975 itasca 25 motor specs Please help (https://www.irv2.com/forums/f65/need-1975-itasca-25-motor-specs-please-help-128346.html)

Casper32462 06-27-2012 09:18 AM

NEED 1975 itasca 25 motor specs Please help
 
I have a 1975 Itasca 25' with the Chevy 350. The page is missing from my manual that has the motor specs. I need the H.P. cam specs (lift and duration) stroke, bore, valve sizes and seats, etc. if someone has this pace could you please send me a copy. I would be forever grateful. my E-mail is Casper32462 @ gmail. com

fleamarketer 06-28-2012 02:44 AM

There is a casting number at the rear of the engine above the flywheel that will help I.D. the engine.Also there are casting numbers under the valve covers on the heads where the rocker arms are.All that info is only relevant providing no one has been in there before you.I.E.:4" bore and 3.45 stroke etc for a 350.You could find with the casting number at the rear of the engine it is a 400.

fleamarketer 06-28-2012 07:06 AM

Opps.Typo.Stroke of 3.48 on a 350.

This took some searching because Mortec is gone.Do bookmark it.

Chevy Identification Numbers


All times are GMT -6. The time now is 08:01 AM.

Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2021, vBulletin Solutions, Inc.