iRV2 Forums

iRV2 Forums (https://www.irv2.com/forums/)
-   RV Systems & Appliances (https://www.irv2.com/forums/f54/)
-   -   Splendide 2000s Washer/Dryer (https://www.irv2.com/forums/f54/splendide-2000s-washer-dryer-13617.html)

GStream40 07-07-2007 03:25 PM

Does anyone know of a website that has a drawing breakdown of the Splendide washer/dryer?

In March 2006 we had a bolt break that holds the motor bracket. I removed the broken bolt and looked at the broken ends and it appeared that it had been partially sheared, so I replaced both of the bolts.

In April this year 2007, the motor stopped turning the drum while we were in Florida, I thought the bolt(s) maybe broke again, so I finally got around to removing the unit and taking the access plate off the back today.

The belt was off, the bracket bolts are okay, so I looked around in the unit and found an arm that goes from the back on the motor to a support bracket that the "shock" fastens to. The arm is broken into two pieces. I believe that this arm might have cracked last year when the bolt broke and finally let go.

I will call Westland Sales on Monday to order a new one.

If anyone knows of a website that shows a breakdown drawing of the machine, it sure would help in descibing it when I call and maybe it even has a part number.

Thanks, Ron

GStream40 07-07-2007 03:25 PM

Does anyone know of a website that has a drawing breakdown of the Splendide washer/dryer?

In March 2006 we had a bolt break that holds the motor bracket. I removed the broken bolt and looked at the broken ends and it appeared that it had been partially sheared, so I replaced both of the bolts.

In April this year 2007, the motor stopped turning the drum while we were in Florida, I thought the bolt(s) maybe broke again, so I finally got around to removing the unit and taking the access plate off the back today.

The belt was off, the bracket bolts are okay, so I looked around in the unit and found an arm that goes from the back on the motor to a support bracket that the "shock" fastens to. The arm is broken into two pieces. I believe that this arm might have cracked last year when the bolt broke and finally let go.

I will call Westland Sales on Monday to order a new one.

If anyone knows of a website that shows a breakdown drawing of the machine, it sure would help in descibing it when I call and maybe it even has a part number.

Thanks, Ron

Acker1 07-07-2007 07:59 PM

Look around on this page:
Splendide
I think you'll find it there.
DICK

GStream40 07-08-2007 07:38 PM

Dick,

That was exactly what I needed, found the Motor Support Bracket Part #090586 on the Parts Breakdown List.

Thanks, Ron


All times are GMT -6. The time now is 04:10 PM.

Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2021, vBulletin Solutions, Inc.