iRV2 Forums

iRV2 Forums (https://www.irv2.com/forums/)
-   Monaco Owner's Forum (https://www.irv2.com/forums/f115/)
-   -   Fnt door won't stay open (https://www.irv2.com/forums/f115/fnt-door-wont-stay-open-176282.html)

RWeigant 09-12-2013 06:46 PM

Fnt door won't stay open
 
The front door used to stay open on our 20111 Knight, but not now. Got a ladder and looked on top at how this bar is removed, but, can't figure it out. Anyone know how you take it off?

conmoto 09-12-2013 07:17 PM

Do a search on this forum and you will find the cure. I did it using a crescent wrench closed down tight on the top rail and twisting it down. I am not describing it very well but it is described in detail on another Monaco thread here on IRV2.

Jeff753 09-12-2013 07:39 PM

Quote:

Originally Posted by RWeigant (Post 1725684)
The front door used to stay open on our 20111 Knight, but not now. Got a ladder and looked on top at how this bar is removed, but, can't figure it out. Anyone know how you take it off?

Mine was riveted to the door. Drilled out the rivets. Put it on a Block. Smashed the hinge rivet with a hammer to close the gap and re revited to the door. Good as new.

roscoesdad 09-13-2013 03:30 AM

Here is a link to the posts about this problem. We discussed this a couple of yrs. ago. Mine had 2 flat braces that held the door open. One of the braces has a "dimple" and the other a "buldge". I took a pair of pliers and bent the 2 closer together (buldge now fits into the dimple tighter. Did not have to remove the arms. When I sold the MH a few weeks ago it was working great. https://www.irv2.com/forums/f115/door...rm-104894.html


All times are GMT -6. The time now is 04:04 AM.

Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2021, vBulletin Solutions, Inc.