iRV2 Forums

iRV2 Forums (
-   Truck Camper Discussion (
-   -   Key for Yakima rack (

3DMYWAY 07-18-2014 11:51 AM

Key for Yakima rack
Sorry...did not take time to do a search...need info asap. Have the 1030 Lance which has the Yakima roof rack. Need to put the crossbars/towers back onto the rails but my instructions are less than clear (to me).

Instructions indicate that a key is used for the SKS locks. I had recently removed the crossbars when I had some work done, now I cannot figure out how to a key needed? I do not remember using a key when I removed them. Crossbars were already installed when I bought the camper (14 years ago!) and I do not remember if a key was provided or what it looks like.

Seems the figure shows to use a key to pry the levers open but I do not understand other than "to open the levers", how the key is used.

Glad to see that IRV2 is still here. Seems I have not logged in for maybe 4's a long story. Hope someone has the info...hope I was clear.

yorgor 07-18-2014 12:33 PM

The key is just used to unlock the levers.

blahargoue 07-19-2014 05:42 AM

The locks were optional. Not all racks have locks. Its hard to advise how to install your racks since there are many different Yakima mounting systems.

3DMYWAY 07-19-2014 09:38 AM

I have the locks on the rack but did not unlock them when I removed the crossbars. Perhaps they were there but not locked. Wonder what the key looks like.
Thanks for comments...will just wait until next week and call Yakima; the monsoon changed plans anyway.

All times are GMT -6. The time now is 12:39 PM.

Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2021, vBulletin Solutions, Inc.