iRV2 Forums

iRV2 Forums (https://www.irv2.com/forums/)
-   MH-General Discussions & Problems (https://www.irv2.com/forums/f84/)
-   -   Power Gear slideout gear removal (https://www.irv2.com/forums/f84/power-gear-slideout-gear-removal-222693.html)

dirko 10-09-2014 07:41 PM

Power Gear slideout gear removal
 
Hi Ho: Does anyone know how to remove the the drive gear from the driveshaft? There are three roll pins holding it. If there were two with through holes I would simply use a drift punch and drive them through. With three at 120 degrees there must be a way to pull them out. Anyone know how to pull the roll pins out?

Jbmsr 10-09-2014 11:19 PM

Power Gear slideout gear removal
 
Quote:

Originally Posted by dirko (Post 2263031)
Hi Ho: Does anyone know how to remove the the drive gear from the driveshaft? There are three roll pins holding it. If there were two with through holes I would simply use a drift punch and drive them through. With three at 120 degrees there must be a way to pull them out. Anyone know how to pull the roll pins out?

https://support.powergearus.com/techd...ideout_Sys.pdf

Jesse


All times are GMT -6. The time now is 09:22 PM.

Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2021, vBulletin Solutions, Inc.