iRV2 Forums

iRV2 Forums (https://www.irv2.com/forums/)
-   Travel Trailer Discussion (https://www.irv2.com/forums/f50/)
-   -   Does my roof need replaced? (https://www.irv2.com/forums/f50/does-my-roof-need-replaced-239849.html)

epling 03-26-2015 07:43 AM

Does my roof need replaced?
 
I am brand spanking new to the camper world, and dove straight into deep murky waters by buying a 27' 2005 gulf stream camper at a "good deal" then after buying found out it was a FEMA trailer (please don't tell me what type of quicksand I got myself into with that because we bought it already and can't take it back now). Anyways after finding that out and researching what it means (formaldhyde in cabinets/wood etc), me and my husband has decided to gut the whole thing and basically use the "bones" to build our own camper. Anyways it is now basically a shell no walls or insulation or cabinets left in it. BTW I am 28 weeks pregnant and my hubby is basically doing all the work himself, and hoping to get it done before baby comes in June.

We found some spots in the roof that the wood has been exposed to a leak and rotted so we are going to replace those pieces and wondering if we can reuse the rubber roof by adhering it to wood and then re-sealing it or should we buy a brand new roof and install? Plus we are DIYers so do not want to go to dealer since I have been quoted 4000 for roof replacement when I didn't even spend that on the camper. I even thought about just replacing all the wood and just using the liquid roof on top of the wood (after using the primer) to eliminate the need of buying new EPDM roll out roof. I contacted the company and never got a straight answer on whether or not that is do-able so that idea is at a stand still.

I am going to have so many questions about this project because we want to make it camping worthy, bought a RV toilet and will be getting holding tanks to install. Hopefully we can keep expenses down by researching prices etc. I hope you all don't mind me asking the questions on here, I am sure I am not the only one that has got theirselves in a sticky situation like this and want to just fix it instead of giving up.

As far as roof can anyone give me any pointers?

BFlinn181 03-26-2015 04:31 PM

You've got quite a project! I'd replace all soft wood in the roof then lay down a new EDPM membrane. To try to piece the old back together is going to mean more work and future leaks. If you're looking for RV parts, you might consider used parts from an RV salvage yard.

Here's a pretty complete list:

RV Salvage/Surplus Yards (List) Updated 3/4/15 - RV Forums - myRVparks.com

keymastr 03-26-2015 06:16 PM

That's right, put a new layer of EPDM on after you have all the rot replaced. The only way to make the wood waterproof would be to fiberglass the whole roof but that would likely be more money and would certainly be more work. The suggestion of getting some parts from a salvage yard is a good one. Even if you have to drive a few hours to find one you could save a bundle on RV specific parts like plumbing and electrical systems. Make a list of what you will need before you go if it is a distance away. Good luck, it can all be done pretty easily by someone with basic DIY skills.

09 harley 04-04-2015 10:40 PM

Sounds like a fun project. You can use most any home plumbing product in your trailer. I have replaced my RV sinks with Kohler units and the faucets with Moen and Price Pfister products. The size of RV units is sometimes a challenge because they can be odd sizes. The main difference is that RV parts are cheap and light. Electrical is the same, trailers have converters and maybe inverters but the electric principles remain the same.
Seems that you have a plan and I hope after the baby is born you will be ready to use your new unit. Repair the roof structure and remove all vents, air conditioner etc and then put on a new EPDM roof. Pretty easy, similar to laying down a full glue one piece linoleum floor.
Congratulations on the new addition to the family!

epling 04-23-2015 07:03 PM

Thanks
 
Thanks everyone for their input! Shew this is a project... and not going as fast as I was hoping it would go. We are starting from the floor and then wall structure before we replace the roof. There is a lot of wood rot on the corners and some in the middle. My hubby wanted to make sure the walls were strong enough to support his weight before he replaced the ceiling and roof. I started a blog about our project but it is going slow right now (only have 4 post right now) but if anyone is interested I will share the link. My hubby is taking it on a road trip this coming week to go back home and have some friends help replace the roof and put up the walls so we can focus on putting it back together. So hopefully by the end of next week we can start going a little faster on the project.

tinkerreknit 04-23-2015 07:36 PM

pictures
 
We all love pictures! If you can, post pics to show your progress.

TDI-Minnie 04-23-2015 08:05 PM

I think it would be wise to start with the roof. No point in new floor and walls if water is still coming in the roof.


All times are GMT -6. The time now is 06:21 AM.

Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2022, vBulletin Solutions, Inc.