iRV2 Forums

iRV2 Forums (https://www.irv2.com/forums/)
-   Newmar Owner's Forum (https://www.irv2.com/forums/f103/)
-   -   Need Help With Levelers (https://www.irv2.com/forums/f103/need-help-with-levelers-270297.html)

LuvMy3002 11-14-2015 02:09 PM

Need Help With Levelers
 
We have no power to our Atwood Levelers keypad or controllers on our 2012 BayStar 3002. Has anyone manually retracted their Levelers?

BFlinn181 11-14-2015 02:33 PM

It's done by putting a wrench on the nut on the electric motor. The gearing makes it necessary to turn about 500 revolutions per inch of movement. You could use a socket and an electric drill to speed things up.

Another strategy would be to unplug the jack and use a portable jumper battery to power the jack to retract. If I had to do all 4, that would be my choice.

ready2roam 11-15-2015 06:58 AM

Second to Bob about the battery. But be sure to watch that the jacks retract and reverse the leads if they start to extend. BTW I assume you have no power at the jacks. We were not getting sufficient power because we weren't getting the engine to high idle before starting the jacks up.

Gheidbrink 11-15-2015 09:34 AM

We had a 2009 Baystar 3205. If you put the engine in gear there is an override that will bring the jacks up. Good Luck


All times are GMT -6. The time now is 05:57 PM.

Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2021, vBulletin Solutions, Inc.