iRV2 Forums

iRV2 Forums (https://www.irv2.com/forums/)
-   Monaco Owner's Forum (https://www.irv2.com/forums/f115/)
-   -   Ride height control valves. (https://www.irv2.com/forums/f115/ride-height-control-valves-277020.html)

YC1 01-24-2016 12:12 PM

https://youtu.be/UMkHXO1iI94 Roadmaster Chassis

https://youtu.be/BqR4saIdTLQ Holiday Rambler and Monaco Plant Tour

https://youtu.be/LS6KC-cbQm4 Holiday Rambler Endeavor overview circa 2008

https://youtu.be/QMpYvDVFau8 Holiday Rambler and Monaco Systems overview

https://youtu.be/zwsSxvMIReY Magnum Energy and Intellitec operation

https://youtu.be/PbmNDHqvlyI Roadmaster Chassis Testing

https://youtu.be/8_H6fv0Jb7Y Magnum Energy Inverter

That was a bit of a chore but I hope it helps someone. The one on the Magnum Energy Inverter was already posted and has seen over 5000 views. Guess they might help.

Some of these might be good posted in a sticky in the Monaco Forum area.

96 Wideglide 01-24-2016 12:27 PM

Thanks Myron! And, thanks to your Grandson :thumb:!

Windecker 01-24-2016 02:52 PM

That was some good thinking! Thank you for doing that and taking the time to share the information:bow:
Windecker

Quote:

Originally Posted by YC1 (Post 2912300)
I was able to get into their system when they went bust. I downloaded every file I could get my hands on. They were by numbers with no index. I renamed them into files that I would recognize. I keep them in a folder and when I need something I do a partial search and the files pop up.

Don't worry, I have backups to the backups. I have sent a few DVD copies out to members of this forum. Unfortunately they mostly apply to the units near the 08 year models. However there is a lot of similiarity. Even with these snowflakes.

I have a copy of the promotional video put out by HR back then. A video on the operation of the EMS panel is very useful as well.


Vanwill 01-27-2016 11:37 AM

Quote:

Originally Posted by YC1 (Post 2913247)
https://youtu.be/UMkHXO1iI94 Roadmaster Chassis

https://youtu.be/BqR4saIdTLQ Holiday Rambler and Monaco Plant Tour

https://youtu.be/LS6KC-cbQm4 Holiday Rambler Endeavor overview circa 2008

https://youtu.be/QMpYvDVFau8 Holiday Rambler and Monaco Systems overview

https://youtu.be/zwsSxvMIReY Magnum Energy and Intellitec operation

https://youtu.be/PbmNDHqvlyI Roadmaster Chassis Testing

https://youtu.be/8_H6fv0Jb7Y Magnum Energy Inverter

That was a bit of a chore but I hope it helps someone. The one on the Magnum Energy Inverter was already posted and has seen over 5000 views. Guess they might help.

Some of these might be good posted in a sticky in the Monaco Forum area.

Myron, you're a GEM, Bro!

Looking forward to meeting you next week!

YC1 01-27-2016 12:54 PM

I live to serve Van.:D

I am putting together a zipped file containing every file I have gathered over the last 8 years. The files were too large to fit on one DVD so I zipped them up and they will fit.

I will burn several copies and have them available next week. You will need to unzip them but that is an easy enough process.

If I can remember I will bring a creeper along so we can visit the undersides of some of these. Of course I will bring voltmeters and signal tracing tools if anyone would like a course in checking solenoids and batteries.

Keith Hertzo 01-28-2016 09:45 AM

I cant thank you enough for sharing - the videos are very helpful to understand what we are about to pick up ! ( 2006 Monaco 40PAQ) I tried to get a reservation at the gathering but was informed by lazy-days that it is full. (DARN) I do all service and repairs myself. I am a retired electrical engineer and enjoy still getting my hands into this stuff.. Even though I hope I dont have to.. We are supposed to pick up our coach on Monday. I dont feel that the coach batteries were charging during our initial checkout. I intend to test that before i receive the unit. La-Mesa RV in Port St-Lucie.
We have a 15day guarantee and I was hoping to make the gathering. I need a fast education. This site is a real big help.. I watched the videos posted and have been researching the BIRD system. Looks real easy to test. I have experience designing control systems. With your sharing and Monaco emailing me the electrical drawings i hope to get through most issues. Never will equal learning from hands on experience. Thank YOU

YC1 01-28-2016 12:54 PM

Welcome to the forum Keith. I missed last years rally as well and I only live 40 minutes away. It is going to be fun meeting everyone. I will have a big notebook and camera.

I will bring my creeper and bump cap too.

10Boomer 01-29-2016 03:36 AM

Just purchased 2008 Monaco Camelot 40 PDQ, this thread/ with links for service and videos was great. Thx for sharing. 👍🏻😬

nodine 01-29-2016 04:33 AM

Quote:

Originally Posted by YC1 (Post 2917643)
I live to serve Van.:D

I am putting together a zipped file containing every file I have gathered over the last 8 years. The files were too large to fit on one DVD so I zipped them up and they will fit.

I will burn several copies and have them available next week. You will need to unzip them but that is an easy enough process.

If I can remember I will bring a creeper along so we can visit the undersides of some of these. Of course I will bring voltmeters and signal tracing tools if anyone would like a course in checking solenoids and batteries.

Myron,

Over the years you have made a lot of good technical information available to others and we thank you for that. Looking forward to meeting you next week and I would love to get one of your zipped DVD's.

Bob

CadillLinc 01-29-2016 11:17 AM

Here's a possible source for leveling valves: Air Suspension Component Distributor - Dayton Air Control Products distributes Air Suspension components for HD Truck, Trailer, Bus, RV and Work Trucks

rmcb 01-29-2016 11:56 PM

Myron,
Deb and I will unfortunately not be able to attend what sounds like a fantastic gathering. I would love to be a shill in the audience when Craig and Van do their presentation. It will be good!

I would also love to get my hands on one of your zipped DVD's and would gladly pay for it. If you are so inclined, I would appreciate it very much. If not, no foul. I will just get Craig or Van intoxicated on the ALCan Highway this summer and steal one of theirs.

Regards,

Roy

YC1 01-30-2016 08:29 AM

Quote:

Originally Posted by rmcb (Post 2921076)
Myron,
Deb and I will unfortunately not be able to attend what sounds like a fantastic gathering. I would love to be a shill in the audience when Craig and Van do their presentation. It will be good!

I would also love to get my hands on one of your zipped DVD's and would gladly pay for it. If you are so inclined, I would appreciate it very much. If not, no foul. I will just get Craig or Van intoxicated on the ALCan Highway this summer and steal one of theirs.

Regards,

Roy

PM me with your address. Be patient though. I live out in the sticks and think I am out of mailing envelopes. I have sent plenty of them out over the years. It is my way of paying it forward.

Anyone else is welcome to PM me too.

Captjake1 01-30-2016 08:34 AM

Quote:

Originally Posted by YC1 (Post 2921371)
PM me with your address. Be patient though. I live out in the sticks and think I am out of mailing envelopes. I have sent plenty of them out over the years. It is my way of paying it forward.

Anyone else is welcome to PM me too.

This is AWESOME! What an excellent gesture! Thanks Myron! :thumb:

rmcb 01-30-2016 09:18 AM

Thanks Myron, will do!

And thanks for your wonderful spirit!

Roy


All times are GMT -6. The time now is 07:51 PM.

Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2021, vBulletin Solutions, Inc.