iRV2 Forums

iRV2 Forums (
- General Discussion (
-   -   Invisibrake activating from engine brake (

bcosich001 07-06-2016 03:19 PM

Invisibrake activating from engine brake
Anyone else have the issue of the engine brake activating toad brakes while using invisibrake? Apparently my engine brake triggers the brake lights on the coach, which is what activates the toad brakes.

Anytime I switch the engine brake on, the red light and beeper goes off until I either accelerate or turn the engine brake off.

The dealer doesn't have any ideas, and I emailed road master, but haven't received a response yet.

Any advice would be appreciated.

MtnTrek 07-06-2016 04:00 PM

Generally, the more info you can give about your Mod., chassis, yr., etc. the easier it is to offer suggestions.
Yeah, I can see where that might be a sticky wicket using the EB on long grades.
You might review these numerous threads (all over the map) on the topic.
Depending on your chassis there might be a work around?

Good luck

micpib1354 07-06-2016 04:14 PM

bcosich001, here is a thread that covers some of the issues you presented. There are many opinions on how the problem should be handled. I personally prefer that my TOAD brakes only activate when I use my service brake, others like theirs to activate with the exhaust brake... I guess to each his own. JH

All times are GMT -6. The time now is 01:54 PM.

Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2022, vBulletin Solutions, Inc.