iRV2 Forums

iRV2 Forums (
-   Toads and Motorhome Related Towing (
-   -   Toad fuse disconnect (

rotorjock 06-18-2017 02:46 PM

Toad fuse disconnect
I want to put in a fuse disconnect for my toad. I need to pull a 2 amp mini fuse now. What size wire do I need, and can I use an inline fuse? I'd rather not spend the $60 for the ones I've found online.

BFlinn181 06-18-2017 03:38 PM

Take a burned fuse that fits the fuse panel. Break the plastic cover off. Solder a wire to each of the spades that fit in the fuse holder. Add an inline fuse holder for your two amp fuse, and a switch.

rotorjock 06-18-2017 05:11 PM

That answers what I thought, the inline fuse should work. What about the correct wire gauge?

BFlinn181 06-18-2017 06:22 PM

A 2 amp fuse doesn't need heavy wire, 16 to 18 ga would be plenty. Note the wire size of the inline fuse and match that, or whatever is handy.

rotorjock 06-18-2017 06:44 PM

Thanks. I pretty much had it figured out, but I wanted confirmation I was doing it right. I think I am. I'll start gathering the parts this week.

All times are GMT -6. The time now is 11:28 PM.

Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2021, vBulletin Solutions, Inc.