iRV2 Forums

iRV2 Forums (https://www.irv2.com/forums/)
-   MH-General Discussions & Problems (https://www.irv2.com/forums/f84/)
-   -   Another Freeze Question (https://www.irv2.com/forums/f84/another-freeze-question-375447.html)

Arby49 01-18-2018 05:46 PM

Another Freeze Question
 
After several dasys of freezing weather, finally had to drain tanks. The sanicon motor would not come on. I could use the 3 inch drain, but could not use the 1.5 inch tube.

Any suggestions on what the problem is and how to fix.

dper0413 01-18-2018 06:09 PM

Try putting a small heater in the water Bay area for awhile then try again. Might be frozen.

Cat320 01-20-2018 08:56 AM

I permanently fixed my Sanicon system...took it off and put it in storage at home.

Arby49 01-20-2018 03:35 PM

A follow-up question since it still won't work. I have tried to "thaw" it, freeing it by turning the screw in the back, and checking for power. Now I am looking for the 20 amp fuse that controls power. Any help locating the fuse would be helpful.

dverstra 01-21-2018 02:58 AM

Quote:

Originally Posted by Cat320 (Post 3999063)
I permanently fixed my Sanicon system...took it off and put it in storage at home.

^^X2^^


All times are GMT -6. The time now is 03:24 PM.

Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2022, vBulletin Solutions, Inc.