iRV2 Forums

iRV2 Forums (https://www.irv2.com/forums/)
-   Fleetwood Owner's Forum (https://www.irv2.com/forums/f107/)
-   -   Pace Arrow: PACE ARROW owners group (https://www.irv2.com/forums/f107/pace-arrow-owners-group-393245.html)

homerbw 06-20-2018 11:56 AM

Living 8 years full time in our Pace Arrow Vision. She was a mess bringing her up to snuff for the first two years but we love her and she gets from point a to point b beautifully.

lonfu 06-21-2018 07:31 AM

perfect, going to use it on a dp that I have too...

lonfu 06-21-2018 07:38 AM

Having the same problem, any pix of the wood size? having a problem seeing it in my mind. did you glue it to the original paneling? I get the 3/4 x1 1/2" but the 2"????? you made a bunch of little pieces or one long piece for each side? did you insert the blocks into the foam?? behind the ceiling panel?

thanks...



Quote:

Originally Posted by artaslesen (Post 4239588)
2001 35R with a nice skylight in the shower. the screws kept falling out on the inside so here is my fix. remove all screws and the inside plastic. Good time to clean exposed plastic. where the screw holes are I scraped any foam off the 1/4" plywood foam pannel. I cut several pieces of 3/4 x 1 1/2 x 2" wood which I predrilled screw holes thru the 3/4" thickness and started a screw in and out. I put wood glue on the bottom of the insert wood and screwed in down to press the pieces together. after all holes had been reinforced with new wood and glue dried,I removed the screws and reinstalled the inside skylight. No more loose screws. .


Cacique 06-23-2018 07:27 AM

Quote:

Originally Posted by lonfu (Post 4251840)
Having the same problem, any pix of the wood size? having a problem seeing it in my mind. did you glue it to the original paneling? I get the 3/4 x1 1/2" but the 2"????? you made a bunch of little pieces or one long piece for each side? did you insert the blocks into the foam?? behind the ceiling panel?

thanks...

On my previous unit I redid the skylight in the shower as well and inserted a LED strip all around the frame on the inside and conected to regular lights and it looked very nice. Wish I had some pictures to show. But planning on doing same on the Pace Arrow soon

Cacique 07-07-2018 01:04 PM

Finaly chose the new floor for the unit we will use the new Lifeproof vinyl board with padding totaly waterproof and also scratchproof. Maybe this will reduce scratching from slides, just maybe.

c21cg 07-10-2018 01:52 PM

Thinking we have bought a money pit 1999 Ford model
 
:banghead:
have had one disaster after another- not even on the road yet... bought this used from an estate with No knowledge of it's condition... 2 mos in, checking the water and the pump had to be replaced. both A/C s had to be replaced, ALL the cpvc was rotten and replaced with braided hose now, fixin to hit the road for 4500 miles and - poof- a whiff of smoke and spent 3 days looking for the transfer relay box.. not sure if we can ever get all the stuff fixed.. the RV is packed and ready to leave with 2 teens. I am an Electrician (on a Ferry from Alaska) and can do a multitude of things, but knowing nothing about this RV and finding the location of switch boxes etc. has been harrowing to say the least... at 70 yrs old I am thinking I should have bought something different.. and hindsight is always 2020- today (2 months later) I am tracing the burnt wires and trying to fix the NO Neutral on the whole motorhome... did get a manual from Intellitec and this awesome link from here ... so , onward,, really wanted to take this trip before Schools starts again.. ekkk https://www.irv2.com/forums/f107/tran...nt-118232.html

Cacique 07-11-2018 01:34 PM

Quote:

Originally Posted by c21cg (Post 4284136)
:banghead:
have had one disaster after another- not even on the road yet... bought this used from an estate with No knowledge of it's condition... 2 mos in, checking the water and the pump had to be replaced. both A/C s had to be replaced, ALL the cpvc was rotten and replaced with braided hose now, fixin to hit the road for 4500 miles and - poof- a whiff of smoke and spent 3 days looking for the transfer relay box.. not sure if we can ever get all the stuff fixed.. the RV is packed and ready to leave with 2 teens. I am an Electrician (on a Ferry from Alaska) and can do a multitude of things, but knowing nothing about this RV and finding the location of switch boxes etc. has been harrowing to say the least... at 70 yrs old I am thinking I should have bought something different.. and hindsight is always 2020- today (2 months later) I am tracing the burnt wires and trying to fix the NO Neutral on the whole motorhome... did get a manual from Intellitec and this awesome link from here ... so , onward,, really wanted to take this trip before Schools starts again.. ekkk https://www.irv2.com/forums/f107/tran...nt-118232.html

Motorhomes that sit for very long time develop more problems then those that a used. When you buy a motorhome you need to have a full inspection done of the entire unit before taking it out on a trip and then that first trip shoul be a short one and all systems shoulb be checked and rechecked before a 4500 mile road trip.

Cacique 07-14-2018 08:44 AM

Dear Pace Arrow friends with a U shaped dinnet. Do you use the dinnet as a sleeping place and what does the cushion look like. Because my unit came without a cushion and I have never seen one set as a bed.

Cacique 07-14-2018 08:45 AM

1 Attachment(s)
This is the ushaped dinnetAttachment 210900

Cacique 07-14-2018 08:47 AM

Can anyone send a picture of the cushion and the dinnet set up as a bed

c21cg 07-18-2018 11:00 AM

we have a 1999 MONEY PIT ourselves.. right now we are struggling thru 4500 miles from Houston to carlsbad, to grand canyon, bryce canyon, yellowstone, mt rushmore, denver and home... https://www.facebook.com/graduationv...dmin_todo_tour 7-2018

c21cg 07-18-2018 11:01 AM

lol tell that to MY HUSBAND - I am just a passenger or innocent bystander, you choose

c21cg 07-18-2018 11:06 AM

https://scontent-dfw5-1.xx.fbcdn.net...b5&oe=5BCD2762

c21cg 07-18-2018 11:15 AM

looks like you removed the recliner just inside the door/// can you tell me how you installed your TV ? thx


All times are GMT -6. The time now is 07:37 AM.

Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2022, vBulletin Solutions, Inc.