iRV2 Forums

iRV2 Forums (
-   National RV Owner's Forum (
-   -   Torque for knock sensor (

JJH3rd 06-06-2018 10:26 PM

Torque for knock sensor
I am about to replace the bank 2 knock sensor (I have one in hand: ACD# 213-2829 GM# 12591312) what I want to be sure of is the torque setting I should use when I install it.

Any ideas?:o

Houdoxi71 06-06-2018 10:31 PM

Does the sensor head fit into the block and thread in, or does it slip in and have an attachment ear on the outside that takes a screw?

Finally found a pic.

Turn till stop, 5-7 lbs.

JJH3rd 06-07-2018 12:10 AM

1 Attachment(s)
It screws into the block;

Houdoxi71 06-07-2018 12:23 AM

I found it shortly after posting.

Turn to stop, 5-7lbs.

It's basically a microphone, so go easy on it, lol!

JJH3rd 06-07-2018 11:39 PM


I had found 15ft/lbs for a Silverado and that sounded wrong.

TOM356C 06-11-2018 12:21 AM

could be inch pounds not foot pounds

All times are GMT -6. The time now is 04:17 PM.

Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2022, vBulletin Solutions, Inc.