iRV2 Forums

iRV2 Forums (https://www.irv2.com/forums/)
-   iRV2.com General Discussion (https://www.irv2.com/forums/f59/)
-   -   Insulated glass.... What if? (https://www.irv2.com/forums/f59/insulated-glass-what-if-409647.html)

Bigd9 09-07-2018 04:34 PM

Thanks!

Ssowers 09-08-2018 06:56 AM

I pulled mine out of the the frame. Gently pulled the inside glass apart with a paint scraper. The inside glass was actually etched so I couldn’t just clean it. I even tried CLR but it didn’t work. I eliminated the inside glass and used some 3/8” aluminum flat bar stock as a filler to put back into the gasket. It was the same thickness as the glass. I used some goop to make it stick to the original spacer between the panes of glass. Put it all back together and it worked fine. Cost all of about $20 and a good bit of labor but I only had 2 windows to do.


All times are GMT -6. The time now is 03:37 AM.

Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2022, vBulletin Solutions, Inc.