iRV2 Forums

iRV2 Forums (https://www.irv2.com/forums/)
-   MDT Conversions (https://www.irv2.com/forums/f19/)
-   -   Cruise control (https://www.irv2.com/forums/f19/cruise-control-439512.html)

JEEPOHOLIC 04-16-2019 08:24 AM

Cruise control
 
My cruise control on our sport chassis truck just quit working this morning, itís been working normally up to that point

Waiter21 04-16-2019 08:29 AM

What year is the truck??

JEEPOHOLIC 04-16-2019 08:57 AM

1999 FL-60 base, CAT motor 3126b, md3050 automatic 6 speed, I stepped on the break to disconnect the CC, and when I went to reset at a new speed, it didn’t work, I double checked both switches on the dash

Vongreg 04-21-2020 07:34 AM

Had a FL70 and the cruise control didnít like the switch for the exhaust brake. Turned out if I turned off the exhaust brake the cruise control worked normally

Unplanned 04-21-2020 07:46 AM

Are your brake lights stuck on?

That would do it.

Happy Glamping.

dbear 04-21-2020 06:24 PM

Had similar issue on an F350 years ago. Found a switch up under the dash that brake pedal linkage pressed on to disable CC; also turned on brake lights, I think. I adjusted distance to pedal linkage, but no help. Finally found that the ground wire behind horn on steering wheel had come off. Squeezed connector together a little and plugged back in. No more problems.

charliesimm 09-02-2020 06:49 AM

i've faced the same problem last week.. have you figured it out? :sad:


All times are GMT -6. The time now is 05:15 AM.

Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2020, vBulletin Solutions, Inc.