Lot a mildew by dr side slide out front wall. Ripped out carpet and installed peel and stick.
I double sticky taped 1/8 hard board then liquid nailed another layer staggering the joints. That brought it leval with the black tradition plastic edeging. I then used 48 x 7 inch peel and stick laminate 1/16 thick..
I positioned the pieces along the edge so it overhung the plastic underneath by 2 ". I did not peel the backing off those 2 " so it will not stick to the ceramic floor. The next piece beside it will cover the black plastic edging enough so it will stick to it as it is not flat.
I could not make a proper border as the transition was more important to me. Seems to be a nice even trans. Though.
What year and model coach? I would be concerned about the mildew. Moisture is getting in somewhere.
|All times are GMT -6. The time now is 07:00 AM.|
Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2021, vBulletin Solutions, Inc.