iRV2 Forums

iRV2 Forums (https://www.irv2.com/forums/)
-   RV Systems & Appliances (https://www.irv2.com/forums/f54/)
-   -   See Level II 2nd Monitor in Wet Bay (https://www.irv2.com/forums/f54/see-level-ii-2nd-monitor-in-wet-bay-536547.html)

TraceJohnson 05-12-2021 09:18 AM

See Level II 2nd Monitor in Wet Bay
 
I have installed the new See level II system in my Coach and used existing wires from old system. I now have obtained a second monitor to install in the Driver side Wet Bay. The sensors are on passenger side straight across from Wet Bay.

Do I just have to run the 'Blue' wire from sensors and a ground? Do I need to provide 12VDC to second monitor?

Help!

2000 Monaco Dynasty
2021 GMC Canyon Denali

Ljwt330 05-12-2021 09:31 AM

Quote:

Originally Posted by TraceJohnson (Post 5748580)
I have installed the new See level II system in my Coach and used existing wires from old system. I now have obtained a second monitor to install in the Driver side Wet Bay. The sensors are on passenger side straight across from Wet Bay.

Do I just have to run the 'Blue' wire from sensors and a ground? Do I need to provide 12VDC to second monitor?

Help!

2000 Monaco Dynasty
2021 GMC Canyon Denali

Look at the installation manual for your model. From what I can determine, you wire the second display in the same way, using two wires, then you need to program the new display for its function as a secondary display.


For system 709 RVC-NLP, the instructions start on page 10.

TraceJohnson 05-12-2021 09:55 PM

Ok thanks

dp7 05-12-2021 11:51 PM

Quote:

Originally Posted by TraceJohnson (Post 5748580)
I have installed the new See level II system in my Coach and used existing wires from old system. I now have obtained a second monitor to install in the Driver side Wet Bay. The sensors are on passenger side straight across from Wet Bay.

Do I just have to run the 'Blue' wire from sensors and a ground? Do I need to provide 12VDC to second monitor?

Help!

2000 Monaco Dynasty
2021 GMC Canyon Denali

You need 12v also to power the second display.


All times are GMT -6. The time now is 10:35 AM.

Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2021, vBulletin Solutions, Inc.