iRV2 Forums

iRV2 Forums (https://www.irv2.com/forums/)
-   Tiffin Owner's Forum (https://www.irv2.com/forums/f106/)
-   -   2018 Phaeton 40 IH Closet Clothes Hanger Rod Sags (https://www.irv2.com/forums/f106/2018-phaeton-40-ih-closet-clothes-hanger-rod-sags-537015.html)

Boston Cajun 05-15-2021 09:26 PM

2018 Phaeton 40 IH Closet Clothes Hanger Rod Sags
 
Has anyone upgraded their clothes hanger rod in the rear closet. When loaded with clothes, it sags considerably. I am concerned about it breaking. I wanted to replace it with a heavier size pipe but not sure of size to use. For the time being, I have placed a wooden rod from center of the rod to the floor. It helps but is unsightly.
Looking for any suggestions.

Thanks

NLOVNIT 05-15-2021 09:40 PM

Mine had a center support bracket attached. Yours didn't?

Lt Dan 05-15-2021 09:48 PM

Mine also has a center support. Contact Tiffin customer service and ask them to send you one since yours is missing.

Jabber Jaw 05-16-2021 06:10 AM

I'd suggest using a piece of stainless tubing, same outside diameter, & cut to length. Then replace the wooden rod. Result, no more sagging, no painting, nor rusting, & a much stronger clothes rod! And no support rod from the floor either! :dance:


All times are GMT -6. The time now is 09:03 PM.

Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2021, vBulletin Solutions, Inc.