Blowing IGN 2 fuse
Hello all, I normally sit and read your post in my email. Now I need to post.
I am blowing the Ignition 2 fuse as soon as I turn on the key. My wipers and
dash heater controls do not work. I also have codes SPN 1209 FM2 and SPN 627 FM2. I know that the 10 amp fuse does not power up all these items but I am sure it powers up a relay that does. I called Forest River and was told they did not get any older schematics in the purchase of Coachman. Does anyone have schematics that would cover a 2006 Coachman Cross Country - Freightliner - Cummins or have any knowledge on this IGN 2 circuit.
Thanks in Advance - i am watching
Houghton Lake Michigan: bow:
seat. Not having a schematic I would pull the ignition relay if known which one OR If you know where the ignition solenoid is or can find it maybe start there. If not start one at a time replacing the fuse as it blows till you find the shorted one(not ideal). If you use a meter or power probe(great investment) it might be a little easier to locate a short.
Iím not an expert but have lots of dummy time under my belt...
|All times are GMT -6. The time now is 04:22 AM.|
Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2021, vBulletin Solutions, Inc.