iRV2 Forums

iRV2 Forums (https://www.irv2.com/forums/)
-   Newmar Owner's Forum (https://www.irv2.com/forums/f103/)
-   -   2007 Kountry Star Slide Issue (https://www.irv2.com/forums/f103/2007-kountry-star-slide-issue-542486.html)

Keith55 06-23-2021 03:42 PM

2007 Kountry Star Slide Issue
 
Just back from a trip.

The one motor electric slide on the driver's side front didn't want to come in. The lock arms had been acting funny like extending when the slide was out.

Well I coaxed it in and one locking arm locked (the other stays open). It took quite a few tries as it would move an inch and then stop.

I opened the basement and there was some smoke. Aired it out and decided this was a problem for home.

I am thinking control board but have no real idea where to start.

Any thoughts would be appreciated.

Massparanoia 06-24-2021 08:22 PM

Quote:

Originally Posted by Keith55 (Post 5803316)
Just back from a trip.

The one motor electric slide on the driver's side front didn't want to come in. The lock arms had been acting funny like extending when the slide was out.

Well I coaxed it in and one locking arm locked (the other stays open). It took quite a few tries as it would move an inch and then stop.

I opened the basement and there was some smoke. Aired it out and decided this was a problem for home.

I am thinking control board but have no real idea where to start.

Any thoughts would be appreciated.

If the smoke was underneath the slide where the motor is, it was probably the motor. I believe the control boards are usually located in a separate location.


All times are GMT -6. The time now is 10:46 AM.

Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2021, vBulletin Solutions, Inc.